Vino sa-l asculti in showroom !
Amplificator Stereo Integrat
Putere: 2 x 100 W ( 8 ohm, 20 Hz-20 kHz, 0.019% THD )
Intrari Digitale: USB, Optic, Coaxial
Intrari Analogice: 6
Preamplificator Phono: DA
Iesiri Preamplificate: Subwoofer
Filtraj :12,000 uF
Aluminium front panel of 8 mm and complete steel chassis of 1,5 mm; Fully symmetrical stages with discrete components; Double pair of MOS-FET transistors per channel on outputs; Toroïdal transformer, double-mono configuration; Complete adjustment (via front panel or remote control) of the volume & balance settings; Direct Inputs access; By-pass input.
The Chord CPM 2650 integrated amplifier is designed around the latest versions of the highly successful CPA2500 and SPM650 Pre and Power amplifier combinations. It has all the flexibility of its bigger brother, the CPM 3350. Line level source selection for up to six input signals can be achieved using the supplied remote handset or via the front panel controls. Two tape loops allow you to record one source whilst also listening to another. A separate switchable preamplifier output is available for bi-amping.
3 pairs of single ended RCA-Phono inputs, 2 pairs of XLR Balanced or 2 pairs of RCA phono single ended inputs, Coax BNC, Optical TOSLink, USB digital inputs, Wireless Bluetooth A2DP input, AV Bypass via RCA-phono input. Remote and manual control with display system. 2 x 120 Watts RMS per channel into 8Ohms 2 x 170 Watts RMS per channel into 4 Ohm, 2 x 220 Watts RMS burst per channel into 4 Ohm.
The Chord CPM 3350 integrated amplifier design is based on the CPA3200E and SPM1050 pre and power amplifier combinations but developed specifically to give a one box solution. It offers all the flexibility of a Chord preamplifier with line level source selection for up to six input signals using the remote handset or via the push button front panel controls. Individual input gains can be selected to prevent large changes in volume when switching between inputs. Two tape loops allow for recording one source whilst listening to another.
The A30.7 is a seven-channel (7 x 150 watt) power amplifier utilising proprietary UFPD technology (please see technologies). It is designed to provide high power output with very low distortion for Primare’s SP32 audiophile preamp/processor and all other multi-channel audio processors. UFPD’s instantaneous rise time and prodigious power result in a naturally fast, clean and agile sound over a much wider frequency range and with exceptional headroom. Ecologically the A30.7 is far superior to conventional Class A/B designs being extremely efficient without generating excessive heat.
The A34.2 is a 2 x 150 watt stereo power amplifier utilising proprietary UFPD technology. It is designed to provide high power output with very low distortion for Primare’s PRE32 audiophile preamplifier and all other preamps, as well as multi-channel audio processors. UFPD’s instantaneous rise time results in a naturally fast, clean and agile sound over a much wider frequency range and with exceptional headroom.
I32 two channel integrated amplifier
The I32 is an upgradable two x 120 watt integrated amplifier utilising proprietary UFPD power technology. It is designed to provide high power output with very low distortion
and system control for Primare’s new 30 series range of hi-fi separates. UFPD’s instantaneous rise time results in a naturally fast, clean and agile sound over a much wider frequency range and with exceptional headroom. Ecologically the I32 is far superior to conventional Class A/B designs being extremely efficient without generating excessive heat. In addition it provides a special eco-friendly standby mode of just 0.2 W
The build quality is of this power amplifier exceptional, featuring two solid pieces of aluminium casing. The appearance is refreshingly understated with no control buttons to be seen and an oval level indicator taking us to times past.
Vino sa-l asculti in showroom !
With 5 RCA inputs - plus 1 balanced, this superb integrated amplifier has a bypass feature on the video input. This means that the preamplifier section can be bypassed if for example you may want to connect a home theatre processor.
The RMB-1555 is a remarkable multichannel amplifier with power output conservatively rated at 120 watts per channel into 8 ohms (all channels driven!). With all but the most demanding speakers located in extraordinarily large rooms, the RMB-1555 exerts the kind of precise control that presents both nuance and bombast correctly from the faintest flute overtones to the subterranean rumble of an approaching apocalypse.
The RMB-1585, Rotel’s new flagship theater amplifier, provides both the massive power and sonic sophistication required by the finest home theater systems. With five channels, each capable of producing 200 continuous watts each into 8 ohm loads (a full kilowatt of output power!), the RMB-1585 masters any A/V system regardless of speaker load or room size.
It’s no secret the typical long runs of speaker cable in custom installations present real challenges to amplifiers. The best way to maximize the sound quality of custom speakers is to give them high quality power. Identical in terms of features to their 50 watt per channel cousins but with a full 8 x 100 watts per channel, all channels driven at 8 ohms, the RKB-8100 and RKB-D8100 are Rotel’s most powerful custom installation amplifiers. Yet, they maintain the compact, dual-fan cooled 2U chassis that makes them space efficient in the equipment rack. Either is the perfect solution for higher performance multizone audio systems. Sound quality and reliability have been engineered throughout to make them truly set and forget designs. Dual SMPS power supplies partnered with a high efficiency, low heat, Class D operation and no compromise audio engineering set a new standard for the custom installation amplifier category. Choose either the analog-only input RKB-8100 or the digital + analog input RKB-D8100 as suits the system configuration. In either case, be prepared for an extraordinary audio experience.
The RKB-850 and RKB-D850 are rated at 8 x 50 watts RMS into 8 ohms all channels driven and can double that output into 4 ohms as a result of their sophisticated, efficient Class D design. The amplifiers are rugged and extremely reliable. Yet, Rotel has gone further to maximize long service life, utilizing dual thermostatically controlled fans to exhaust heat away from the output modules and power supply.