BC Acoustique

Amplificator BC Acoustique EX-888

Cod produs: ref.27671

Culori disponibile:

Amplificator BC Acoustique EX-888 Negru
Amplificator BC Acoustique EX-888 Argintiu
Pret: 8.900 RON
  • 24 luni
    Garantie 2 ani
3 rate fara dobanda prin CARD AVANTAJ

Prezentare generala Amplificator BC Acoustique EX-888

The EX888 is a tubes amplifier using KT88 power tubes and 12AX7/12AU7 for pre-amplification. We wanted to achieve with the EX-888 an amplifier with an exceptional sound that honours the legend of tubes but also benefiting from a reserve of power that allows easy association with the majority of speakers in the market.
To achieve our goals, we used a proven pattern but with some unpublished parts (including a so-called "anode follower"), which allowed us to reconcile a low rate of reaction against (ensuring maximum power) and a very low level of distortion (less than 1% with a gradient odd harmonics characteristic of achievements tubes).

Optional board slot
Massive continuous power of 500VA transformer

Power supply
It is based on a very high quality impregnated EI transformer capable of delivering a continuous power of 550VA. The diodes used in the rectifier bridge are broadband-like to ensure a continuous tension as pure as possible. Finally the filter is achieved by an innovative structure called CLC ie the equivalent of a third order filter for a perfect smoothing of the output voltage.
Output transformer
The winding of the output transformer uses a structure to achieve perfect symmetry output stages and the same minimal distortion. They use a deoxygenated copper wire. They are very generously sized to pass the entire dynamics of the output stage. They are wound in 3Ω and 6Ω (normed 4Ω and 8Ω) whereas the trend (long ago) prevailing in speaker manufacturers.
The volume knob is a motorized with APLS potentiometer.
Capacitors links are aluminum insulated polypropylene sheet.
They come from renowned manufacturer SOLEN.
The resistors areall high power.
Double side soldering.
The circuit is printed on epoxy and 70 microns thick.

Specificatii tehnice pentru Amplificator BC Acoustique EX-888

Link producator:
Alte caracteristici: Tubes: KT88×4 12AX7×2, 12AU7×2
Input Sensitivity: 360 mV (700 mV bypass)
Input impedance: 100kΩ
Dimensiuni: 430x200x405 mm
Greutate: 25 kg
Putere RMS: 2 x 40W (ultra-linear mode) or 2 x 20W (in triode mode)
Raport Semnal/zgomot: ≥ 93dB
Raspuns in frecventa: 10Hz ~ 38kHz (-1 dB)
THD: ≤ 1% (1kHz)

REVIEW-URI PENTRU Amplificator BC Acoustique EX-888

Momentan produsul Amplificator BC Acoustique EX-888 nu are nici un comentariu din partea utilizatorilor. Fii tu primul care adauga un comentariu.

Introdu codul din imagine Introdu în câmpul de mai jos textul din această imagine

La cumperi la preturi PROMO, poti plati in rate si ai livrare GRATUITA pentru comenzi peste 300RON in reteaua Fan Courier.
Vezi specificatii tehnice, review-uri si pareri despre Amplificator BC Acoustique EX-888 (ref.27671).

Disclaimer: Echipa încearcă să menţină acurateţea informaţiilor la Amplificator BC Acoustique EX-888 dar rareori acestea pot conţine mici inadvertenţe, ex: accesorii neincluse în preţ, specificaţii tehnice diferite, informaţii neactualizate despre preţ şi stoc. Ne poţi contacta oricând pentru a clarifica eventuale nelămuriri. Nu uita să menţionezi în corespondenţa ta numele exact al produsului - Amplificator BC Acoustique EX-888